2024 Land Pride RC4620 Series RC4620

Information

2024 Land Pride RC4620 Series RC4620

Land Pride's RC4620 (RCM4620) 20' Rotary Cutter complements our broad line of folding cutters. This cutter is also available in a single wing, 14-foot and 1000 RPM models, is designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.

Features may include:

GEARBOX WARRANTY

7 Year Limited Gearbox Warranty shows confidence in gearbox integrity.

3" CUTTING CAPACITY

These cutters offers 3" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

DIAMOND BLADE CARRIER

The diamond blade carrier handles most cutting conditions and leaves a cleaner cut.

Photos

Highlights

  • High River, Alberta
  • 2024
  • Land Pride
  • RC4620 Series RC4620
  • Available
  • Cutting: 2" (5.1 cm) to 12" (30.5 cm)

Specifications

  • 2024
  • Land Pride
  • RC4620 Series
  • RC4620
  • Rotary Cutters
  • Tractor: 70 hp (52.2 kw) to 250 hp (186.4 kw)
  • Gear Lube 80-90W EP
  • Input: ASAE Cat. 6 with constant velocity u-joint | Intermediate & Wing: Cat. 5 with slip-clutch
  • Horsepower: 250 hp (186.4 kw) Splitter / 210 hp (156.6 kw) Center & Wing
  • 6" x 9 x 21" Laminated tires / 29" x 9" Used aircraft tires without foam filling / 27" x 7.75" Used aircraft tires with foam filling | Number of : 6 - Wheel option: 4 on transport axle and one on each wing axle. / 8 - Wheel option: 4 on transport axle and two on each wing axle.
  • Blade Tip: Up to 17,000 fpm (86.4 mps)
  • Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch | Jack: Standard
  • Signal: LED | 7 Pin connector: SAE J560 pin configuration
  • Cutting Capacity: 3" (7.6 cm) | Lift Hydraulics Center Deck: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. / Right Wing: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. / Left Wing: 2 3/4" x 8" Rephasing hydraulic cylinder with hoses & fittings. | Wing Folding Hydraulics: Two 3" x 12" single-acting hydraulic cylinders complete with hoses & fittings. | Wing flex while operating: Max. 20o down can float up as needed as long as the wheel(s) are still on the ground. | Side Skirt Material: 1/4" (6 mm) plate. | Six Blades (2 per Carrier): 1/2" (13 mm) x 4" ( 10.2 cm) Heat treated free swinging alloy steel with up lift. | Blade Overlap: 6" (15.2 cm) | Stump Jumper / Blade Holder: 1" (2.5 cm) Thick diamond blade bar | Axle Fasteners: 1 1/4" (3.2 cm)
  • 20' - 0" (6.1 m)
  • 21' - 0 1/2" (6.41)
  • Min: 9' - 11" (3.02m) With cutting height at 2" (5.1 cm)
  • 17' - 8 1/2" (5.4 m) With cutting height at 2" (5.1 cm)
  • 13" (33 cm)
  • Cutting: 2" (5.1 cm) to 12" (30.5 cm)
  • Gearbox: 6.2 Pints (2.93 L): Divider Gearbox / 4.7 Pints (4.7 L): Center deck, LH deck & RH deck spindle gearboxes
  • Wing flex while operatingSkid Shoes Wing Deck: Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes. / Center Deck: Replaceable: 2 skid shoes | Blade Bolt: Keyed with hardened flat washer & locknut. | Front & Rear Guards: Single chain or double chain. | Transport Axle: Spring-cushioned on center transport axle. | Axle Fasteners: Greasable pins
  • Total Machine: 6,540 lb (2966.5 kg) Front & rear single chain guards, 6 - AC/FF tires, CV Driveline, standard clevis, & diamond blade bar with dishpan. | Tongue: 2,160 lb (979.8 kg)
  • 1 - Piece, 10 gauge (3.4 mm)
  • Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.