2024 Land Pride BB45 Series BB4596

Information

2024 Land Pride BB45 Series BB4596

BB45 SERIES DRAG SCRAPERS

Land Pride BB45 Series Pull-Type Drag Scrapers, with standard fixed axle. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade in to lower areas.

Features may include:

1/2" X 6" CUTTING BLADE

High carbon steel heat-treated for hardness gives the cutting blade long life. Reversible so both edges can be used before replacing the cutting blade.

24" HIGH MOLDBOARD

Has a high material capacity for doing a lot of work in a short time.See Specifications for actual capacities.

HEAVY SIDE PANELS

3/8" Heavy side panels with angle reinforcement on the diagonal are built heavy to handle tough jobs and to keep the side panels straight under side loads.

Photos

Highlights

  • High River, Alberta
  • 2024
  • Land Pride
  • BB45 Series BB4596
  • Cross construction: 4 x 4 in (10 x 10 cm) Square tubing
  • Available

Specifications

  • 2024
  • Land Pride
  • BB45 Series
  • BB4596
  • Box Blades/Scrapers
  • 70-130 hp (52-97 kw)
  • Tilt cylinder: 3 in (7.6 cm )
  • Tilt cylinder: 8 in (20 cm)
  • 15 in (38 cm) Ribbed implement tires on new wheels
  • Maximum transport: 20 mph (32 km/h)
  • Pull-Type
  • Dump clearance: 21 in (53 cm) | Maximum tilt angle: 3 1/2° | Tongue construction: 4 x 4 in (10 x 10 cm) Square tubing | Side panel construction: 3/8 x 24 in high x 40 in deep (1 x 61 cm high x 102 cm deep) | Moldboard construction: Break formed 1/4 x 24 in (0.6 x 61 cm) high
  • 8' - 0" (2.44 m)
  • 96'
  • Of bucket: 36 in (91 cm) From front of side panel to cutting edge | Maximum cutting depth: 5 in (13 cm) Below grade | Maximum tilt depth to the right: 7 in (18 cm) Drop on blade point
  • Cross construction: 4 x 4 in (10 x 10 cm) Square tubing
  • Bucket reinforcement: 3 Brace bars
  • Standard axle: 1,405 lbs (637 kg) | Tilt axle: 1,525 lbs (692 kg) | Of material in weight box: 760 lbs (345 kg) Level full with concrete | Tongue: 506 lbs (230 kg)
  • Reversible/replaceable 1/2 x 6 in (1.3 x 6 cm) | Reinforcement: 3 x 3 x 3/8 in (7.6 x 7.6 x 1 cm) Angle iron welded to the moldboard
  • 3 bore x 8 stroke (7.6 bore x 20 stroke)